Daniella Barn Door May 16th, 2018 - 09:18:59
Most strap hinges are around 20" in length providing plenty of support for heavier barn doors. Pinnel hinges are one of the most cost effective strap hinges on the market. There are two main components of a pinnel hinge the strap portion that attached to the door frame and the pinnel portion that attaches to the jamb of the frame. The end of the pinnel has a pin on it that attaches to the strap portion on the door. This allows you to attach the components on the respective structures and then assemble the door to the frame. The strap portion of the pinnel hinge usually uses lag screws or bolts for assembly.
It is a trend today to save space in the home. Traditional doors have been used for a long time but take up a lot of space which can get in the way sometimes. Because most people do not live in mansions they find that the space used when opening or closing a door eats up a lot of space in their homes. Do you find this to be a problem as well? If you had to look for solutions what would you look for? Chances are you would look for a door that would slide open look nice and go with the décor in your home. Why barn doors? Because the door you choose would not have to open up the traditional way but can be slid across the wall where it is hung. You are certainly in luck because companies have seen this trend as well making high quality attractive barn doors and barn door hardware that you can put in your home to save space and make a fashion statement.
When gliding open portion of the door hangs towards the outside of the rooms wall looking like a piece of decoration in the room. And when closed it looks like a classy enclosure that one intends it to be. Flat Track Design As mentioned above this style has a track which is mounted over the doorway stretching along the length of the wall with a couple of track hangers which can be attached to the door knobs and revolve horizontally down the length of the track. The track is built of solid steel. Due to the physics involved this kind of setup provides the track with exceptional power. Solid Steel Construction The hanger track and practically every single part of the system are made of solid steel. This is important to the style strength and largely the durability of barn door hardware.
Also it is a good idea that when it comes to purchasing the wood for your barn door you purchase wood which has already been treated. Then this means that you wont have to worry about adding a protective coating to the barn door you are building until after construction has been completed. However if you are going to use untreated wood then after cutting the various pieces of wood to size it is a good idea to add a protective coating to them before construction begins. This will help to ensure that all areas of the door are protected from the elements and ensure that water from the ground will not be absorbed by the wood at the base. When it comes to coating the wood you have chosen to use to build a barn door you have a number of options available to you. You can either stain or paint the wood which one you choose will of course depend on the kind of coating that has been used on the rest of the barn to protect it.